D1SPEC リアハブユニット(GT-R用)
2022/6/14 発売開始

D1SPEC リアハブユニット(GT-R用)

  • おすすめ商品
23,100円 ~ 46,200円 税込
※2個毎に送料がかかります。
商品コード: DMHBGTRR1 ~ DMHBGTRR1SET
JANコード: 4580563082423 ~ 4580563082430
関連カテゴリ
数量
カートに追加しました。
お買い物を続ける カートへ進む

ハブユニットとは、自動車を車輪から支える重要な役割を担っております。近年のドリフト車両は、切れ角アップのナックルが主流となり、ロアアームの延長化、さらにハイグリップタイヤが登場し、ハブユニットに加わる負担は想像以上です。足回りのセッティングや、使用頻度によりますが、すぐにガタが来てしまう状態になっています。純正部品も高騰しており、中古部品も品薄になってきています。テストに関しては、街乗りからテストを初め、D1GRANDPRIXシリーズ参戦車両やD1LIGHTSシリーズ参戦車両で大会本番でもドリフト走行を幾度となく繰り返し商品化し実証しております。構造上、ドライブシャフトのナットを締め込めば、取付初期のガタつきのような症状はでませんので、安心してご使用下さい。

仕様





















P.C.D 114.3−5H
ハブボルト有効ネジ 26.0mm
ハブボルト ネジピッチ M12×1.25mm
ハブボルト スプライン径 14.3mm

適合型式













適合可 R32/R33/R34 GT-R用
適合不可 2WD不可

※構造上、ドライブシャフトのナットを締め込めば、取付初期のガタつきのような症状はでませんので、安心してご使用下さい。
※左右共通にする為に、サイドブレーキのインナーシュー固定のピンは商品届き次第、お客様ご自身で圧入して頂く仕様となります。
※競技競技専用部品となります。装着すると騒音・車体振動が純正部品より大きくなる事があります。

こちらの商品は競技専用部品となりますので、サーキットなどクローズドコース専用か展 示会での使用に限定されており、一般公道では使用できません。一般公道で装着使用した 場合、道路交通法・保安基準に抵触する恐れがあり、道路運送車両法その他法令の定める 道路または公道に類する場所での使用は厳しく禁止されております。諸法規に違反した 場合は監督官庁による処罰の対象になります。競技専用部品を装着して一般公道で使用する際には、車両を保安基準に合致する状態にした上でご使用されることと、必要に応じて車両の登録変更(改造車検)を行ってください。保安基準適合の可否は、各地の陸運支局等にお問合せ下さい。 当該部品の使用によって直接または間接的に生じた一切の損害に対しては購入者があらゆ る義務・責任・管理を負うこととします。 製品購入に当たっては競技専用部品という性質をご理解頂いた上で自己責任にて使用し、 如何なる場合にも発売元へ責任の追求及び損害賠償の請求をしないことをご承諾頂いた場合に限ってご購入ください。


 

Hub units play an important role in supporting the wheels of a car. In recent years, knuckles with increased turning angles have become mainstream for drift vehicles, lower arms have been extended, and high-grip tires have appeared, which put more strain on the hub units than you can imagine. Depending on the suspension settings and frequency of use, they can easily become loose. Genuine parts are also becoming more expensive, and used parts are becoming scarce. As for testing, we have started with city driving and have repeatedly tested drift driving on vehicles participating in the D1 GRAND PRIX series and D1 LIGHTS series in actual competitions, and have commercialized and proven the product. Due to the structure, once the drive shaft nuts are tightened, there will be no rattling during the initial installation, so please use it with confidence.

Specifications





















PCD 114.3−5H
Hub bolt effective thread 26.0mm
Hub bolt thread pitch M12×1.25mm
Hub bolt spline diameter 14.3mm

Compatible models













Compatible For R32/R33/R34 GT-R
Not compatible Not compatible with 2WD

*Due to the structure, if you tighten the drive shaft nut, there will be no rattling during initial installation, so please use it with confidence.
*In order to make both sides the same, the pin for fixing the side brake inner shoe will be pressed in by the customer upon receiving the product.
*This is a part for competition only. When installed, the noise and vehicle vibration may be greater than with genuine parts.

This product is a part for competition only, so it is limited to use only on closed courses such as circuits or at exhibitions, and cannot be used on public roads. If installed and used on public roads, it may violate the Road Traffic Act and safety standards, and use on roads or places similar to public roads as specified by the Road Transport Vehicle Act and other laws and regulations is strictly prohibited. Violation of various laws and regulations will be subject to punishment by the supervisory authorities. When using on public roads with competition-only parts installed, make sure the vehicle complies with the safety standards before using it, and if necessary, change the registration of the vehicle (modified vehicle inspection). Please contact the local Land Transport Bureau to find out whether the safety standards are met. The purchaser shall bear all obligations, responsibilities, and management for any damages that occur directly or indirectly as a result of the use of the part in question. When purchasing a product, please understand that it is a part for competition use only, use it at your own risk, and purchase only if you agree not to pursue responsibility or seek compensation for damages from the manufacturer under any circumstances.


 

ページトップ