調整式スタビライザーリンク(HONDA N-BOXカスタム/JF5)

調整式スタビライザーリンク(HONDA N-BOXカスタム/JF5)

14,080円 税込
商品コード: DMSLL195M10SET
JANコード: 4580563029978
数量
取扱説明書(PDF)
カートに追加しました。
お買い物を続ける カートへ進む

調整式スタビライザーリンク(通称スタビリンク)とは、スタビライザーとサスペンションを繋ぐロッドの事をいいます。純正値の車高では、どの車種でもスタビライザーとスタビリンクの角度はほぼ直角になっていますが、車高を下げた場合には、この角度が変わってしまい、スタビライザー本来の性能が発揮しなくなり左右のストロークが変わり、ロール制御機能が低下し、乗り心地も悪くなってしまいます。車高を下げた場合は、調整式スタビライザーを装着する事で、純正値の角度に調整する事ができますので、本来の性能を発揮する事ができます。
















































純正サイズ 250mm
調整幅 250mm〜320mm 
調整方法 ターンバックル式
ロッド長 195mm
ロッド径(最大部) 17Ф
ロッド部材質 アルミ A6063
エンドネジ径 M10
車種名 N-BOXカスタム
適合型式  JF5(2WD)
  ※フロント スタビライザーリンク
保証期間 ご購入より1年間の保証付※1

注意事項
・スタビリンク交換時は車両をリフトアップし、スタビライザーが効いていない状態で左右の調整を実施して下さい。
・本製品は純正での適合確認となっており、 車種別適合表は全て純正比となります。純正以外のショックやスタビライザーに関しては現車にて
 必ず実測した上で適合確認を行って下さい。
※1 ボールジョイント部のブッシュが破れた場合のみ、保証対象となります。

An adjustable stabilizer link (commonly known as a stabilizer link) is a rod that connects the stabilizer and the suspension. At the factory-set vehicle height, the angle between the stabilizer and stabilizer link is almost a right angle for all vehicle models. However, if the vehicle height is lowered, this angle changes, the stabilizer will not perform as it should, the stroke on the left and right will change, the roll control function will decrease, and the ride will become less comfortable. If the vehicle height is lowered, installing an adjustable stabilizer will allow you to adjust the angle to the factory-set value, allowing the stabilizer to perform as it should.

























Original size 250mm
Adjustment width 250mm~320mm 
Adjustment method Turnbuckle style
Rod length 195mm
Rod diameter (maximum part) 17Ф
Rod member material 関連商品'); } });
ページトップ