調整式スタビライザーリンク(HONDA フィットシャトル/GG8)
調整式スタビライザーリンク(通称スタビリンク)とは、スタビライザーとサスペンションを繋ぐロッドの事をいいます。純正値の車高では、どの車種でもスタビライザーとスタビリンクの角度はほぼ直角になっていますが、車高を下げた場合には、この角度が変わってしまい、スタビライザー本来の性能が発揮しなくなり左右のストロークが変わり、ロール制御機能が低下し、乗り心地も悪くなってしまいます。車高を下げた場合は、調整式スタビライザーを装着する事で、純正値の角度に調整する事ができますので、本来の性能を発揮する事ができます。
| 純正サイズ | 320mm |
| 調整幅 | 285mm〜355mm |
| 調整方法 | ターンバックル式 |
| ロッド長 | 230mm |
| ロッド径(最大部) | 17Ф |
| ロッド部材質 | アルミ A6063 |
| エンドネジ径 | M10 |
| 車種名 | フィットシャトル |
| 適合型式 | GR8(4WD) |
| ※フロント スタビライザーリンク | |
| 保証期間 | ご購入より1年間の保証付※1 |
注意事項
・スタビリンク交換時は車両をリフトアップし、スタビライザーが効いていない状態で左右の調整を実施して下さい。
・本製品は純正での適合確認となっており、 車種別適合表は全て純正比となります。純正以外のショックやスタビライザーに関しては現車にて
必ず実測した上で適合確認を行って下さい。
※1 ボールジョイント部のブッシュが破れた場合のみ、保証対象となります。
An adjustable stabilizer link (commonly known as a stabilizer link) is a rod that connects the stabilizer to the suspension. At the factory vehicle height, the angle between the stabilizer and stabilizer link is nearly a right angle for all vehicle models. However, if the vehicle height is lowered, this angle changes, preventing the stabilizer from performing its intended function, changing the stroke from side to side, reducing roll control and resulting in a more comfortable ride. If the vehicle height is lowered, installing an adjustable stabilizer allows you to adjust the angle to the factory value, allowing the stabilizer to perform its intended function.
| Original size | 320mm |
| Adjustment width | 285mm~355mm |
| Adjustment method | Turnbuckle style |
| Rod length | 230mm |
| Rod diameter (maximum part) | 17Ф |
| Rod member material | Aluminum A6063 |
| End screw diameter | M10 |
| Car model name | Fit shuttle |
| Compatible model | GR8 (4WD) |
| ※Front stabilizer link | |
| Warranty Period | 1-year warranty from date of purchase*1 |
Notes
- When replacing the stabilizer link, lift the vehicle and adjust the left and right sides with the stabilizer disabled.
・This product has been confirmed to be compatible with genuine parts, and the compatibility chart for each vehicle model is based on the genuine parts. For non-genuine shocks and stabilizers, please be sure to measure them on the actual vehicle before confirming compatibility.
※1 Only broken bushings in the ball joint section are covered by the warranty.







